ULMA HYDROPLUS Mini with Ductile Iron Slotted Grate (460) Class C

SKU: HYDROM-460

Kit includes channel section(s), grate(s), 2 end caps, locking devices

$135.94$1,301.74

New from ULMA, the HYDROPLUS Mini is a shallow neutral trench drain for pedestrian and occasional car traffic for areas of low hydraulic requirements. Polypropylene channel externally measures 132mm wide, internal width of 100mm and overall height 84mm and 1 meter in length. Compatible with the same full line of grates as offered for the ULMA polymer concrete channels, this system offers a wide variety of options.

ULMA HYDROPLUS Mini
Diagrams are located on the bottom of the channel to assist with installation and custom cuts. Raised notches allow for proper saw alignment for cutting angles as well as straight section cuts.
  • Modular design offers the flexibility of two bottom outlet knockout options for pipe connections
  • Two side knockouts can be used as ‘open’ outlets or connected to other channels to create a tee or right and left 90° bends
  • Every 10cm, the channel is molded on the bottom to allow for cuts to made, providing a natural coupler that will slide into that female section of the next channel
  • The bottom of each channel contains diagrams for cutting, installation as well as cutting angles
  • Channels conveniently feature raised notches that assist in properly aligning saws for diagonal cuts when fabricating angles
  • The side cut-out area allows for 90-degree assembly of channels if the project requires

Load class ratings for entire systems will always be determined by the lowest class within the system. For example, if the channel is rated as a C and the grate is rated as a D, the overall system will be rated as load class C. The same is true should the channel be rated as load class C and the grates are rated as load class A; the system as a whole would be rated as load class A.

HYDROPLUS Mini Kit Includes:

  • 1M (3.3 ft) polypropylene channel sections
  • Ductile Iron Grate (item# 460) 124mm x 497mm; Qty.2 grates per 1M channel section
  • Qty.2, closed-end caps per kit
  • Two locking bolts (LD100MX-3) per 1M channel section

ULMA Hydro Plus Mini Drawing

The Ductile Iron Grate (460) is rated as a Load Class C, and measures 124mm X 497mm. (2 grates per 1M channel section) Channels are marked to aid in cutting to 0.5M length if needed.

 

Ductile Iron Slotted Grate (460) Specification Sheet

CLICK HERE for HYDROPLUS Mini Installation Instructions

CLICK HERE for ULMA Declaration of Conformity

NOTE: For proper installation, grates must be in channel during installation.

Your #1 Trench Drain Supply Resource!

Grate Pattern

System

HYDROPLUS MINI

Load Class

Load Class C

Product Type

Drainage Kit

Manufacturer

TDS, ULMA

Grate Width

5 inch

Application

Animal and Zoo, Driveway Drainage, Greenhouse, Municipal, Patio, Pool and Spa, Poolside, Residential

Channel Material

Plastic

Channel Type

Neutral

Grate Material

SHARE YOUR CART