ULMA HYDROPLUS Mini with 494/PNH100KCAM Slotted HP Grate Class A

SKU: HYDROM-494

Kit includes channel section(s), grate(s), 2 end caps, locking devices, 2 installation chairs

$117.62$1,081.86

The HYDROPLUS Mini is a shallow neutral trench drain for pedestrian and occasional car traffic for areas of low hydraulic requirements. Polypropylene channel externally measures 132mm wide, internal width of 100mm and overall height 84mm and 1 meter in length. Compatible with the same full line of grates as offered for the ULMA polymer concrete channels, this system offers a wide variety of options.

ULMA HYDROPLUS Mini
Diagrams are located on the bottom of the channel to assist with installation and custom cuts. Raised notches allow for proper saw alignment for cutting angles as well as straight section cuts.
  • Modular design offers the flexibility of two bottom outlet knockout options for pipe connections
  • Two side knockouts can be used as ‘open’ outlets or connected to other channels to create a tee or right and left 90° bends
  • Every 10cm, the channel is molded on the bottom to allow for cuts to be made, providing a natural coupler that will slide into that female section of the next channel
  • The bottom of each channel contains diagrams for cutting, installation as well as cutting angles
  • Channels conveniently feature raised notches that assist in properly aligning saws for diagonal cuts when fabricating angles
  • The side cut-out area allows for 90-degree assembly of channels if the project requires

Load class ratings for entire systems will always be determined by the lowest class within the system. For example, if the channel is rated as a C and the grate is rated as a D, the overall system will be rated as load class C. The same is true should the channel be rated as load class C and the grates are rated as load class A; the system as a whole would be rated as load class A.

HYDROPLUS Mini Kit Includes:

  • 1M (3.3 ft) polypropylene channel sections
  • Two Polypropylene ADA Compliant grates (item# 494) 122mm x 500mm; 2 per 1M channel; Load Class A
  • Two closed-end caps per kit
  • Two locking bolts (LD100MX-1) per 1M channel section

ULMA Hydro Plus Mini Drawing

 

Specification Sheet Item# 494 Polypropylene Grate

CLICK HERE for HYDROPLUS Mini Installation Instructions

CLICK HERE for ULMA Declaration of Conformity

NOTE: For proper installation, grates must be in channel during install.

 

Your #1 Trench Drain Supply Resource!

Load Class

Load Class A

Product Type

Drainage Kit

Manufacturer

ULMA

Grate Width

5 inch

Application

Greenhouse, Municipal, Patio, Residential

Channel Material

Plastic

Channel Type

Neutral

System

HYDROPLUS MINI

Grate Material

SHARE YOUR CART