The SS600 Series stainless steel trench drain is designed for commercial markets. Exclusively by TDS, this system features a built-in 1% percent slope and a smooth v-shaped profile, allowing the system to achieve flow rates up to 470 GPM. The channels measure 48″ long, 6.25″ wide (OD) with a 4″ wide throat (ID). The 16 gauge 304 stainless steel channels are chemically inert and resistant to high temperatures. The flanged channels join with the provided bolts and rubber gasket for a secure fit. The lightweight channels minimize installation time.
- 316L Stainless steel wedge wire grates
- Class B Load Rating
- ADA compliant
- Heel friendly
Load class ratings for entire systems will always be determined by the lowest class within the system. For example, if the channel is rated as a C and the grate is rated as a D, the overall system will be rated as load class C. The same is true should the channel be rated as load class C and the grates are rated as load class A; the system as a whole would be rated as load class A.
- 48″ SS600 304 stainless steel pre-sloped channel (1 for each 4′ of kit ordered)
- 48″ stainless steel wedge wire grates (1 per channel)
- Grate hold-down devices (2 per grate)
- Installation chairs
- 1 End cap
- 1 End outlet
- Rubber gasket(s)
- Installation instructions
Please review the inlet/outlet depths shown in the chart below for each system length.
SS600 Series offers tees, 90-degree elbows, neutral and 24″ half channels, as well as end/bottom outlets, debris outlet strainers, catch basins and trash baskets. Custom sections and 316 stainless steel channels are also available. If you have a larger project, or if your project requires these items, marine-grade 316L stainless steel or specific channel depths, we invite you to request a quote.
Want to learn more about this system? Click Here for more information.