The ULMA D100 is a neutral polymer concrete linear trench drain channel with stepped edges for lateral protection. The polymer concrete material allows the channels to have higher impact resistance. It also provides a smooth channel surface with a near zero absorption rate which increases the flow rate, in comparison to concrete which has a 5-10% absorption rate. The ULMA D100 channels are resistant to 59 different chemicals. (Not rated for sanitary or high-temp applications.)
Drainage Kit Includes:
- Grate (Galvanized Slotted Grate)
- Locking Device
- Channels – Neutral sections
- Installation Chairs
- Universal End Cap/End Outlets
Grating:
- 420– Galvanized Slotted Grate – (Load Class A)
- Color: Silver
Specification Sheet for ULMA 420
Channel Dimensions:
- Height: 220 mm (8.7″)
- Width – Outside: 155 mm (6.1″)
- Width – Inside: 100 mm (3.93″)
- Length: 1 meter (39.3″)
- Molded side and bottom outlet
Cut-outs for the side or bottom are located on the channel for easy installation. A Core drill is available before shipment (at an additional cost).
