This pre-sloped polymer concrete trench drain kit uses the ULMA Type U100KX channel with integral stainless steel edging. It has an external width of 130 mm, an internal width of 100 mm, and is available in overall heights ranging between 130 mm and 280 mm. Channels are 1 meter in length and have a 0.5% slope. The locking system consists of a locking bar CS100 and hex head screws. Installation hardware is included.
ULMA’s U100KX channel fits Iron Age Designs decorative cast iron trench grating measuring 122 mm x 498 mm. This kit has the Minnione pattern, which is available in either the raw casting or Baked on Oil Finish (BoOF)
Each Kit Includes :
|
Half Channel Kit Includes :
|
This kit has the Minnione pattern, which is available in either the raw casting or Baked on Oil Finish (BoOF).
Specification Sheet for IA-MIN-0520
Grate Actual Dimensions: 4.81″ [122mm] x 19.43″ [498mm] x .81″ [20.57mm]
Please allow an additional 2 weeks for delivery of BoOF products. (If not in stock)
What is Baked On Oil Finish (BoOF)? Click Here to learn more.
Load class ratings for entire systems will always be determined by the lowest class within the system. For example, if the channel is rated as a C and the grate is rated as a D, the overall system will be rated as load class C. The same is true should the channel be rated as load class C and the grates are rated as load class A; the system as a whole would be rated as load class A.
