This pre-sloped polymer concrete trench drain kit uses the ULMA U100KX channel with integral stainless steel edging.
Channels are available in 1/2-meter (without end cap or outlet) or a full 1-meter length with a 0.5% slope. It has an external width of 130 mm, an internal width of 100 mm.
The locking system consists of locking bar CS100 and hex head screws. Installation hardware included.
Each Kit Includes :
|
Half Channel Kit Includes :
|
This kit has the Minnione pattern, which is available in either the raw casting or Baked on Oil Finish (BoOF).
Specification Sheet for IA-MIN-0520
Actual Grate Dimensions: 4.81″ [122mm] x 19.43″ [498mm] x .81″ [20.57mm]
Please note that all raw cast-iron grates begin to naturally rust with exposure to any form of moisture and will appear bright orange before settling to brown.
Load class ratings for entire systems will always be determined by the lowest class within the system. For example, if the channel is rated as a C and the grate is rated as a D, the overall system will be rated as load class C. The same is true should the channel be rated as load class C and the grates are rated as load class A; the system as a whole would be rated as load class A.
