ULMA HYDROPLUS Mini with 488 Fiberglass bar grate – Load Class C

SKU: HYDROM-488

Kit includes channel section(s), grate(s), 2 end caps, locking devices

$409.07$4,579.33

New from ULMA, the HYDROPLUS Mini is a shallow neutral trench drain for pedestrian and occasional car traffic for areas of low hydraulic requirements. Polypropylene channel externally measures 132mm wide, internal width of 100mm and overall height 84mm and 1 meter in length. Compatible with the same full line of grates as offered for the ULMA polymer concrete channels, this system offers a wide variety of options.

ULMA HYDROPLUS Mini
Diagrams are located on the bottom of the channel to assist with installation and custom cuts. Raised notches allow for proper saw alignment for cutting angles as well as straight section cuts.
  • Modular design offers flexibility of two bottom outlet knockout options for pipe connections
  • Two side knockouts can be used as ‘open’ outlets or connected to other channels to create a tee or right and left 90° bends
  • Every 10cm, the channel is molded on the bottom to allow for cuts to be made, providing a natural coupler that will slide into that female section of the next channel
  • The bottom of each channel contains diagrams for cutting, installation as well as cutting angles
  • Channels conveniently feature raised notches that assist in properly aligning saws for diagonal cuts when fabricating angles
  • Side cut-out area allows for 90 degree assembly of channels if project requires

Load class ratings for entire systems will always be determined by the lowest class within the system. For example, if the channel is rated as a C and the grate is rated as a D, the overall system will be rated as load class C. The same is true should the channel be rated as load class C and the grates are rated as load class A; the system as a whole would be rated as load class A.

HYDROPLUS Mini Kit Includes:

  • 1M (3.3 ft) polypropylene channel sections
  • Vinyl ester FRP grate (item# 488) 122mm x 1M; Qty.1 grate per 1M channel section, Load Class C
  • Qty.2, closed end caps (HYDRO-PM-EC) per kit
  • Two locking bars (LD100MX-5) and two screws per 1M channel section

ULMA Hydro Plus Mini Drawing

The vinyl ester FRP Grate (488) is rated as a Load Class C, and measures 124mm X 1M. (1 grate per 1M channel section). This grate has a gritty surface for better traction. Its composition allows a higher resistance to harsh chemicals and temperatures.

ULMA 0.6 Center Vinyl Ester FRP Grate 488 drawing

CLICK HERE for HYDROPLUS Mini Installation Instructions

CLICK HERE for ULMA Declaration of Conformity

NOTE: For proper installation, grates must be in channel during installation.

Your #1 Trench Drain Supply Resource!

Grate Pattern

,

Load Class

Load Class C

Product Type

Drainage Kit

Manufacturer

ULMA

Grate Width

5 inch

Application

Animal and Zoo, Chemical and Hygiene, Commercial, Driveway Drainage, Greenhouse, Industrial, Municipal, Patio, Pool and Spa, Poolside, Residential, Transportation

Channel Material

Plastic

Channel Type

Neutral

System

HYDROPLUS MINI

Grate Material

CSI Code 22 00 00, 22 14 00, 22 14 26, 22 14 26.19, 33 30 00, 33 40 00, 33 44 00, 33 44 13, 33 44 16, 33 46 13
SHARE YOUR CART