POLYCAST® 600 Series Kit w/ Stainless Steel Edge & DG0670 Plastic Grate | Load Class A

POLYCAST® 600 Series is a polymer concrete channel that has a built-in 0.65% slope that allows the system to achieve flow rates of 470 GPM. The installation chairs tighten the joints between channels while aligning and leveling the drainage run. Each installation chair is secured to the ground (using your own rebar), ensuring that the channels will not float during the concrete pour. The grates are made of plastic and are normally used in areas with pedestrian traffic. Provides excellent chemical resistance and durability.

Grating:

• DG0670 black plastic grate – Class A Load Rating
• Pattern: slotted bar
• Chemical resistance
• DG0670 Grate Specification Sheet

Each Kit Includes:

• 48″ POLYCAST® 600 channel (1 for each 4′ of kit ordered)
• 24″ plastic Grates (2 per channel)
• Stainless steel channel edging (2 per channel)
• Grate Hold-down devices (1 per grate)
• Installation Chairs
• End Caps (1 per system)
• End Outlet (1 per system)
• Installation instructions

Want to learn more about this system? Click Here for more information.

Layout Info:
Please review the inlet/outlet depths shown above for each system length. (Add 3/4″ to include the channel bottom thickness)

If you have certain channels, a channel depth requirement, require vinyl ester channels, or have a large project, we invite you to request a quote.

NOTE: For proper installation, grates must be in the channel during installation.

2 foot kits are intended to be an extension to kits and only include one install chair and no end caps/outlets. Other accessories are to be purchased separately if it is intended to be a stand-alone kit.

Your #1 Trench Drain Supply Resource!